1.3GHz-5.2kW solid-state power source amplifier is a product developed for professional application in the field of particle accelerators, which can provide continuous wave or pulsed power from 50W to 5.2kW.
* Continuous adjustment of output power, 0-360° adjustment of output phase, and adjustable duty cycle in pulse mode are possible.
* Also has after internal hardware and software feedback control to further improve the stability of power, frequency, phase and other parameters.
* Wattsine particle accelerator dedicated power source has built-in circulators and passive loads to accommodate a wide range of VSWR load applications and has comprehensive protection features with complete protection mechanisms and controls.
Frequency, power and pulse characteristics can be customized according to customer requirements.
| Item | Min | Typical | Max | Units |
|---|---|---|---|---|
| Frequency | 1300 | MHz | ||
| Open loop amplitude short stable | 0.1 | % | ||
| Openg-loop phase short-strable | 0.1° | |||
| Output power@1dB | 5.2 | kW | ||
| Phase noise | -80 | dBC/Hz | ||
| Spurious | -70 | dBC | ||
| Harmonics | -30 | dBC | ||
| Duty Cycle | 0.1 | 100 | % | |
| Output VSWR | 1.5 | Open Circuit | ||
| Operating temperature | 5 | 40 | ℃ | |
| Overall efficiency | 45 | % | ||
| Output Interface | WR650 Waveguide |
Control: equipment working status and parameter setting, can view the working status information and configure the working parameters remotely;
Alarm：output power,SWR,current,temperature under detection. Alarm information can be checked remotely;
Protection：over-VSWR,over-temperature,over-input power、over-current,over-voltage protection.The system will shut down the RF output automatically when under protection.
Hard X-Ray Imaging
Large particle acceleration equipment components
Nuclear Magnetic Resonance Auxiliary Equipment
